Using the Same Input to Trigger Multiple Arduinos

Using the Same Input to Trigger Multiple Arduinos

If you ever have a project using two or more Arduinos, it's likely you'll want them to work together.

Say for example you have one Arduino connected to an LCD shield, and another Arduino controlling an LED matrix. You want both to do something when you press a single button - how can this be done?

It turns out to be extremely easy. This video will describe in detail how to trigger multiple Arduinos with a single input.

CODE:

/* Button Turns on and off a light emitting diode(LED) connected to digital pin 13, when pressing a pushbutton attached to pin 2. The circuit: * LED attached from pin 13 to ground * pushbutton attached to GND through pin 2 on two (or more) Arduino's * Note: on most Arduinos there is already an LED on the board attached to pin 13. created 2005 by DojoDave

Breadboard Layout:

Downloads:

Schematic Fritzing File.fzz

If you like this tutorial, check out some of out very best by signing up for our free Arduino Crash Course below.

Avsnitt(61)

Arduino Course for Absolute Beginners 2nd Edition

Arduino Course for Absolute Beginners 2nd Edition

29 Aug 20173min

What is Arduino?

What is Arduino?

Have you seen some really cool stuff being made with a thing called Arduino? What is Arduino anyway? It sounds like an Italian sandwich with extra cheese or something... Well - it's that and a lot mor...

28 Apr 20174min

How to change the font color in the Arduino IDE

How to change the font color in the Arduino IDE

Have you ever wanted to change the font color in the Arduino IDE? Maybe it is hard for you to read the light grey comments in the Arduino IDE, or maybe you prefer something a little bolder. Whatever y...

27 Apr 20174min

Use Serial.print() to display Arduino output on your computer monitor: Part 2

Use Serial.print() to display Arduino output on your computer monitor: Part 2

In many cases while using an Arduino, you will want to see the data being generated by the Arduino. One common method of doing this is using the Serial.print() function from the Serial library to disp...

26 Apr 20176min

Use Serial.print() to Display Arduino output on your computer monitor: Part 1

Use Serial.print() to Display Arduino output on your computer monitor: Part 1

In many cases while using an Arduino, you will want to see the data being generated by the Arduino. One common method of doing this is using the Serial.print() function from the Serial library to disp...

25 Apr 20178min

How to make a secret knock detector to trigger anything with only an Arduino and a few cheap components

How to make a secret knock detector to trigger anything with only an Arduino and a few cheap components

There are a couple good use-case scenarios for making a secret knock detector using an Arduino. You are a spy who needs to authenticate your cohorts You are a super hero who wants a secret knock to o...

24 Apr 201712min

Arduino Pseudo Random Non-Consecutive Number Generator

Arduino Pseudo Random Non-Consecutive Number Generator

In this video we demonstrate how to create pseudo random numbers with Arduino - with a useful twist. This lesson was inspired by the following viewer question: How do I create Random Non-Consecutive ...

23 Apr 201711min

A Review of Make: Magazine

A Review of Make: Magazine

I don't subscribe to many magazines, but I love my subscription to Make: magazine. And even though I rarely have time to sit down and enjoy a magazine in peace and quiet (parents forget what peace and...

22 Apr 20178min

Populärt inom Utbildning

historiepodden-se
rss-bara-en-till-om-missbruk-medberoende-2
det-skaver
harrisons-dramatiska-historia
alska-oss
nu-blir-det-historia
johannes-hansen-podcast
rss-foraldramotet-bring-lagercrantz
not-fanny-anymore
roda-vita-rosen
rss-viktmedicinpodden
sektledare
allt-du-velat-veta
rss-sjalsligt-avkladd
sa-in-i-sjalen
rss-max-tant-med-max-villman
i-vantan-pa-katastrofen
rss-basta-livet
rib-podcast
rss-traningsklubben