EP#37: Banned Arduinos and Tuning Software By Ear

EP#37: Banned Arduinos and Tuning Software By Ear

Podcast Notes

  • MacroFab is moving soon. Fun times! See Figure 1 to see all the stuff we need to move.
  • Parker has finished the first version of the Selective Solder Fixture. It uses magnets to support the PCB to prevent sagging. Files here.
  • To calibrate the machines MacroFab is designing, Parker is working on the O.A.T.B. or Optical Alignment Test Board. It is a 16"x16" PCB panel that has markings and footprints of all sizes to calibrate computer vision systems.
  • As a side project, Parker is gathering parts for the Fantastic Air Realtime Tester. He is going to use a Adafruit Light Tower, the Macro Duino, and possibly the IAQ-CORE air quality sensor. The IAQ-CORE runs $35 however and Parker wants to try the CCS811 which is probably cheaper if he can get his hands on one.
  • Stephen has been continuing work on the Synth Engine he was working on the past couple weeks. The AD9833 is up and running along with a 16bit A/D and D/A. He is able to produce a saw wave that ranges from 13.75Hz to 14080Hz. It is 0.5V/octave or 0.041666V/note. Tuning and tracking is excellent.
  • It seems the Arduino libraries can not handle floating point calculations past 7 decimal places.
  • Stephen has also jumped on the fixture train and has a cut tape strip feeder for placing cut tape and reduce wastage on our My200 Pick and Place.
  • Scott Shawcroft, a previous guest on MEP, now writes for Adafruit! His first article is about the Arduino Zero and is a very technical walk through. Go check it out!
  • Parker has found that datasheet pin names vary from manufacture to manufacture for the same chips. Example is the 74HC595 and pin 9 which is the serial output of the IC. KiCad uses inverse QH for the 74HC595 pin 9 marking. Wat.
  • Someone should decap different 74HC595's or other 7400 series chips to see how much different they are.
  • IoT done right? Mark Rittman using a Amazon Echo to voice control his

Avsnitt(448)

EP#443: Conductive Cuisine

EP#443: Conductive Cuisine

In this episode of Circuit Break, Parker Dillmann and Stephen Kraig delve into the fascinating and somewhat humorous topic of hot dog conductivity. They explore an in-depth study conducted by Seth Jen...

9 Aug 202446min

EP#442: Wanting To Be A Wizard - Matt Brown

EP#442: Wanting To Be A Wizard - Matt Brown

In this episode of Circuit Break, Parker Dillmann and Stephen Kraig are joined by Matt Brown, an inventive engineer and YouTube content creator renowned for his electrifying DIY projects and creative ...

2 Aug 202456min

EP#441: Exploring the Arctic Through Art and Technology with Cy Keener

EP#441: Exploring the Arctic Through Art and Technology with Cy Keener

In this episode, Parker Dillmann and Stephen Kraig chat with Cy Keener, an interdisciplinary artist who merges art and technology to document and visualize the natural world. Cy discusses his journey ...

26 Juli 20241h 4min

EP#440: HMLV - High Mix Low Volume

EP#440: HMLV - High Mix Low Volume

In this episode of Circuit Break, Parker Dillmann and Stephen Kraig dive deep into the concept of HMLV (High Mix Low Volume) PCB manufacturing. They discuss the challenges and advantages of HMLV, cont...

19 Juli 20241h 23min

EP#439: The Nuts and Bolts of Quantum Computing - Rick Altherr

EP#439: The Nuts and Bolts of Quantum Computing - Rick Altherr

In this episode of Circuit Break, hosts Parker Dillmann and Stephen Kraig welcome Rick Altherr, a full stack engineer, to discuss the intricacies of quantum computing. Rick shares insights into the wo...

12 Juli 20241h 8min

EP#438: Solder Slugs

EP#438: Solder Slugs

In this episode of Circuit Break, hosts Parker Dillmann and Stephen Kraig dive into the nuances of working with contract manufacturers, specifically focusing on the responsibilities of both the design...

5 Juli 20241h

EP#437: Embarrassingly Parallel Computing - Steve Furber

EP#437: Embarrassingly Parallel Computing - Steve Furber

In this episode of Circuit Break, hosts Parker Dillmann and Stephen Kraig interview Steve Furber, Professor Emeritus of Computer Engineering at the University of Manchester. They discuss his early car...

28 Juni 202452min

EP#436: International Women in Engineering Day with Kaylan Smith and Laura Manley

EP#436: International Women in Engineering Day with Kaylan Smith and Laura Manley

In this special episode celebrating International Women in Engineering Day, hosts Parker Dillmann and Stephen Kraig are joined by Kaylan Smith, Lead Software Developer for Supply Chain and Finance at ...

21 Juni 20241h 4min

Populärt inom Vetenskap

p3-dystopia
pojkmottagningen
svd-nyhetsartiklar
dumma-manniskor
allt-du-velat-veta
kapitalet-en-podd-om-ekonomi
det-morka-psyket
rss-ufobortom-rimligt-tvivel-2
sexet
rss-vetenskapsradion-2
halsorevolutionen
rss-vetenskapsradion
medicinvetarna
4health-med-anna-sparre
rss-spraket
dumforklarat
paranormalt-med-caroline-giertz
bildningspodden
vetenskapsradion
hacka-livet