Nobody Likes a Dirty Underbevel | WoodTalk 602

Nobody Likes a Dirty Underbevel | WoodTalk 602

It’s show #602 - On today’s show, we’re talking about what would happen if woodworking legends had access to today’s technology, a quick drying wood finish, anti-fatigue mats for the shop, and chisel types and you.


Sponsored by :

Use code WT2025 for 10% off - Exclusions apply.

What's On the Bench
  • Marc made some fancy Walnut garage steps.
  • Matt is working on the breakfast table.
  • Shannon is prepping parts for a middle school class project on Bluebird boxes.
We Did Podcasts

All 3 of us cheated on WoodTalk and appeared on another podcast. Well Shannon didn't, he just hosts another one is a constant dirty cheater

Kickback and Stuff
  • Greg asks If Maloof, Nakashima, Krenov, Frid, and Carpenter had access to modern tools, like CAD, the Festool Domino, and digital conveniences, do you think their work would have been even better, or just different? And in this digital era, would they be revered legends still, or just another set of woodworkers on YouTube?


Listener Questions
  • Yukiki is leading a class on picture frames and asks about a fast drying finish that will allow her students to complete finishing by the end of the class.
  • Tony's feet hurt and he asks what we put on the floor of our shops in the way of mats.
  • David bought some bench chisels at Woodcraft and asks about the other types of chisels and why he would want and use them.
Selected Woodcraft Events

Store Specific Events:

  • March Mania – March 14 & 15 – Parkersburg, WV, Cincinnati, OH, Roanoke, VA: 15% Off Almost Everything and Demos all day

Demos

  • Table Saw Tune-Up - Saturday, March 14th, 1pm
  • Keeping your table saw in top working order makes your project easier and safer. Stop in as we show you how!
  • Joinery Jigs - Saturday, March 21st, 1pm
  • A couple of boards and some nails might work, but they may not be the best solution to keeping your project in one piece. Join us as we review different types of joinery jigs to help you build a strong finished piece.

Classes

  • Rockville, MD: Teens Workshop – Bandsaw Box - Sunday, March 15, 10 AM - 5 PM
  • Richmond, VA: Marquetry: Cutting, Assembly, And Veneer Fundamentals - Saturday, March 7, 9 AM - 3:30 PM
  • Chattanoga, TN: A variety of Jess Crow Resin classes from March 6th through March 10th
Ask Us a Question

Our questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at woodtalkshow@gmail.com

Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker

Hosted on Acast. See acast.com/privacy for more information.

Tämä jakso on lisätty Podme-palveluun avoimen RSS-syötteen kautta eikä se ole Podmen omaa tuotantoa. Siksi jakso saattaa sisältää mainontaa.

Jaksot(623)

Reservations about Shannon | 612

Reservations about Shannon | 612

On today’s show, we’re talking about whether subscriber numbers matter anymore, cutting long miters, and pressing veneer without a vacuum bag.Wood Talk is proudly sponsored by Woodcraft, your trusted ...

5 Elo 1h 8min

When She Gives Away Your Tools | 611

When She Gives Away Your Tools | 611

On today’s show, we’re talking about why workbenches are better than the floor, managing customer expectations, and thick, thick workbenches.Wood Talk is proudly sponsored by Woodcraft, your trusted s...

23 Heinä 1h 18min

Jazz Hands Joinery | 610

Jazz Hands Joinery | 610

On today’s show, we’re talking about the pros and cons of cordless tools, using Blade Cote on a SawStop, workbench setup for a southpaw, and how our design sensibilities have changed over the years.Wo...

15 Heinä 58min

Snodgrass in the House | 609

Snodgrass in the House | 609

On today’s show, we’re talking about Alex Snodgrass. Like, the entire time. From his early days as a mustachioed little baby to today, as he’s in the home stretch of his Next Cut Tour.We’re recording ...

8 Kesä 27min

Kreg Edge Discussion and The Best Trade Show You'll Never Go To | 608

Kreg Edge Discussion and The Best Trade Show You'll Never Go To | 608

On today’s show, we’re talking about the 2026 Woodcraft National Sales Conference & Vendor Trade Show, the best trade show you’ll never go to. We’ll talk about our experience at the show and some of t...

29 Touko 1h 5min

Do Those Nickers Go All The Way Up? | WT 607

Do Those Nickers Go All The Way Up? | WT 607

On today’s show, we’re talking about, what are straight edges good for anyway, color changing desks, and edge jointing quandaries. Wood talk is proudly sponsored by Woodcraft! Use code WT2026 for 10% ...

20 Touko 56min

It's Tiny But It's Better Than Nothing | WT606

It's Tiny But It's Better Than Nothing | WT606

On today’s show, we’re talking about small shop organization, how to use a push stick with the JessEm guides, why are there always mistakes?! Our show is also sponsored by the generous contributions o...

6 Touko 59min

Shannon's Making Blue Ice Again | WoodTalk 605

Shannon's Making Blue Ice Again | WoodTalk 605

It’s show #605 - On today’s show, we’re talking about, woodworking as therapy, is my wood dry enough for a workbench?, dealing with oil stains on plywood.Sponsored by :Use code WT2026 for 10% off - Ex...

23 Huhti 59min

Suosittua kategoriassa Koulutus

rss-murhan-anatomia
psykopodiaa-podcast
kesken
ilona-rauhala
adhd-podi
psykologia
rss-vapaudu-voimaasi
rss-arkea-ja-aurinkoa-podcast-espanjasta
rss-laadukasta-ensihoitoa
rss-koira-haudattuna
voi-hyvin-meditaatiot-2
jari-sarasvuo-podcast
rss-hereilla
rss-liian-kuuma-peruna
rss-loyda-voimasi
filocast-filosofian-perusteet
aamupore
rss-xamk-podcast
rss-spessu
rss-tietoinen-yhteys-podcast-2