Hydrofluoric Acid and Anhydrous Hydrogen Fluoride - Part 2

In this episode, the second installment of a two-part series, Bert Jennings, owner of Jennings Materials Consulting in Spring, Texas, rejoins co-hosts Heather Allain and Marc Cook to continue their discussion on hydrofluoric acid (HF) and anhydrous hydrogen fluoride (AHF) service. Building on Part 1, the conversation shifts to detection, materials, and real-world application. Bert outlines key NDE techniques for identifying cracking and hydrogen blistering, then dives into weld practices and the importance of proper stress relief in carbon steel systems. The group also explores alternative materials, including austenitic stainless steels, ceramics, and glass, along with a “learn from failures” story that highlights the consequences of small oversights. The episode wraps with insights on nickel alloys, welding challenges, and the role of FRP and fluoroplastics—reinforcing that success in HF service depends on both material selection and execution.

This episode is sponsored by Tricor Metals and Rolled Alloys. Show Notes Related reference for MTI members: MS-4 Materials Selector for Hazardous Chemicals: Hydrogen Fluoride and Hydrofluoric Acid Non-members: Visit the MTI bookstore. Corrosion Chronicles is produced by Association Briefings.

Tämä jakso on lisätty Podme-palveluun avoimen RSS-syötteen kautta eikä se ole Podmen omaa tuotantoa. Siksi jakso saattaa sisältää mainontaa.

Jaksot(40)

Understanding FMECA, RCA, and Value Engineering

In this episode, co-hosts Heather Allain and Marc Cook welcome Maria Jose Oestergaard to explore three essential reliability and continuous improvement tools: Failure Modes, Effects, and Criticality A...

5 Elo 1h 9min

The Science of Bonded Liners

In this episode, Michael Krauss, sales director at Knight Material Technologies, joins co-hosts Heather Allain and Marc Cook to discuss bonded lining systems and the materials considerations that infl...

1 Heinä 53min

SEM & EDS in Failure Analysis: Let the Sample Tell the Story

In this episode, failure analysis expert Tedd Anastas of Anastas Technical Services and Brent Moore of Moore Analytical join co-host Heather Allain and guest host Andrew Rentsch, Materials Engineer at...

3 Kesä 1h 2min

Providing Materials Expertise to Process Commercialization

In this episode, Richard Clapp, retired principal consultant from DuPont, joins co-hosts Heather Allain and Marc Cook for a discussion on the role of materials expertise in process commercialization. ...

6 Touko 1h 5min

Hydrofluoric Acid and Anhydrous Hydrogen Fluoride - Part 1

In this episode, the first installment of a two-part series, Bert Jennings, owner of Jennings Materials Consulting in Spring, Texas, joins co-hosts Heather Allain and Marc Cook for a technical discuss...

4 Maalis 42min

Corrosion and Wear Materials Solutions

In this episode, Robert Freed, Ph.D., FASM, Associate Director at the Materials Technology Institute, joins co-hosts Heather Allain and Marc Cook for a practical, materials-focused discussion on corro...

4 Helmi 54min

Eddy Current Testing (ECT) of Heat Exchanger Tubes

In this episode, Evan Lowrance, Corporate NDT Engineer at Webco Industries, and Jonathan Konerza, Tubing Division Manager at Sentinel Integrity Solutions, join co-hosts Heather Allain and Marc Cook fo...

7 Tammi 54min