HOWB 021 – Wooden Boat Dan on building the Sassafras wooden canoe - 02.09.12

HOWB 021 – Wooden Boat Dan on building the Sassafras wooden canoe - 02.09.12

In today’s episode I talk about the Sassafras 12ʹ Canoe project I am working on. I'm building it using plans from the book “The Canoe Shop” by Chris Kulczycki.

The first thing I did when I purchased the book was to cut the binding off with my band saw, then have Office Depot spiral bind the book (cost $4.00) so I could lay it open on my work bench.

A couple other things I did a little differently:

I placed the panel layout closer together on the plywood so I can build the boat out of 3 sheets of Okoume instead of 4. To do this, I entered all the diagrammed panel offsets into an Excel table, then used Excel’s fraction capability to deduct from each of the offsets to arrive at offsets that would place the panels closer together on the plywood. If you want help doing this in Excel, just let me know – it’s pretty slick.

I am building the canoe using the Table of Offsets.

I used Chinese knockoff BS1088 plywood at 1/2 the cost of certified BS1088. The jury is still out on this cheaper stuff – the plys are not equal thickness and there are a few stains and surface imperfections. I also increased the scarf to 1 1/2ʺ (4mm ply).I am tracking all my time and costs for the project – this is a first for me!!!

You can contact me at woodenboatdan@gmail.com to share you comments, feedback, stories, and wooden boat adventures.

Keep the bright side up and the barnacled side down - Wooden Boat Dan over and out :D

PS Please note this podcast was recorded several years ago - some of the links, email addresses, phone numbers, and promos mentioned are outdated and no longer valid.

Tämä jakso on lisätty Podme-palveluun avoimen RSS-syötteen kautta eikä se ole Podmen omaa tuotantoa. Siksi jakso saattaa sisältää mainontaa.

Jaksot(214)

HOWB 212 – Interview | Douglas Brooks Japanese Boatbuilder, Author, Researcher, and Student

HOWB 212 – Interview | Douglas Brooks Japanese Boatbuilder, Author, Researcher, and Student

Today’s podcast is an interview with Douglas Brooks during the 2018 Port Townsend Wooden Boat Festival.Doug is a boatbuilder, author, and researcher specializing in the construction of traditional Jap...

24 Elo 41min

HOWB 211 – Interview | Gini Wilson, Nathan Nelson NW School Wooden Boatbuilding; 2019 Australian Wooden Boat Festival Team USA

HOWB 211 – Interview | Gini Wilson, Nathan Nelson NW School Wooden Boatbuilding; 2019 Australian Wooden Boat Festival Team USA

Today’s podcast is an interview with Nathan Nelson and Gini Wilson at the 2018 Port Townsend Wooden Boat Festival at the Northwest Maritime Center.Nathan and Gini discuss their participation in the 20...

17 Elo 37min

HOWB 210 – Interview | Beth Kennedy SCAMP Camp #3 Builder & Wooden Boat Enthusiast

HOWB 210 – Interview | Beth Kennedy SCAMP Camp #3 Builder & Wooden Boat Enthusiast

Today’s podcast is an interview with Beth Kennedy recorded at the 2017 Port Townsend Wooden Boat Festival at the Northwest Maritime Center.Beth talks about how she got into boat building, wooden boats...

10 Elo 29min

HOWB 209 – Wooden Boat Dan Highlights of 2018 Port Townsend Wooden Boat Festival

HOWB 209 – Wooden Boat Dan Highlights of 2018 Port Townsend Wooden Boat Festival

Today’s podcast is me myself and I recording a podcast about the highlights of this year’s Port Townsend Wooden Boat Festival at the Northwest Maritime Center.As usual I had an absolute blast at the f...

3 Elo 29min

HOWB 208 – Interview | Small Craft Advisors’ Josh Colvin and Marty Loken: SCAMP, New Pram Tender, Heather and More!

HOWB 208 – Interview | Small Craft Advisors’ Josh Colvin and Marty Loken: SCAMP, New Pram Tender, Heather and More!

Today’s podcast is an interview I did with Marty Loken and Josh Colvin during the 2017 Port Townsend Wooden Boat Festival. Marty is now associate editor of Small Craft Advisor magazine and having fun ...

27 Heinä 35min

HOWB 207 – Interview | Dillon Majoros, Designer Extraordinaire CLC Boats

HOWB 207 – Interview | Dillon Majoros, Designer Extraordinaire CLC Boats

Today’s podcast is an interview I did with Dillon Majoros during the 2017 Port Townsend Wooden Boat Festival.Dillon attend the Landing School and is a designer at CLC Boats in Annapolis Maryland. He’s...

20 Heinä 30min

HOWB 206 – Interview | Doug Jones Owner 1947 Pacifica Yawl and Traditional Boat Works in Port Townsend

HOWB 206 – Interview | Doug Jones Owner 1947 Pacifica Yawl and Traditional Boat Works in Port Townsend

Today’s podcast is an interview I did with Doug Jones during the 2017 Port Townsend Wooden Boat Festival.Doug is the owner of Traditional Boat Works. He is also the owner of a beautiful 1947 Sparkman ...

13 Heinä 29min

HOWB 216 – Interview | Bruce Tipton, Boat Builder, Artist and Spar Maker Extraordinaire

HOWB 216 – Interview | Bruce Tipton, Boat Builder, Artist and Spar Maker Extraordinaire

Today’s podcast is an interview I did with Bruce Tipton during the 2018 Wooden Boat Festival in Port Townsend Washington.Bruce moved to Port Townsend in the mid 1970’s to check out the wooden boats an...

8 Heinä 40min

Suosittua kategoriassa Vapaa-aika

nikotellen
antin-matka
ihan-oikeesti
sita
everypodi
the-harlin-show
unicast
tahtitehdas
rss-viihde-media
mutsiputki
oral-sex
20-30-40-podcast
kaikkea-hyvaa
himocast
rss-ropettajainhuone
mysteeripodcast
rss-nikotellen
terkuin-jenna
kasper-ja-mikko
teen-spirit