HOWB 104 – Interview the Expert | CLC Boats Owner John Harris on Stitch & Glue Building - 09.19.13

HOWB 104 – Interview the Expert | CLC Boats Owner John Harris on Stitch & Glue Building - 09.19.13

Today’s podcast is an interview with Stitch and Glue expert John Harris, owner of Boat Kit manufacturer CLC Boats in Annapolis, MD. This is the second of my Interview The Expert series of podcasts focused on 6 methods of boatbuilding: Carvel, Lapstrake, Cold Molded, Stitch and Glue, Strip Planked, and Skin-on-Frame.

In this interview, John discusses the ins and outs of using the relatively modern method of Stitch and Glue building. With this technique, boat panels are cut to a predetermined shape and the edges are “stitched” together temporarily with wire, plastic ties, or duct tape to place the boat in its final geometric shape. The joints are then epoxy filleted to “hold” the boat shape, the stitches are removed, and voilà – you have an almost finished boat.

This method was established by an Englishman in 1959/1960 and is very popular to this day. During the podcast, John discusses the following points on Stitch and Glue:

Description and history

Skill level required to utilize this method

Cost of S&G versus other building methods Time to build with S&G versus other methods Pros and cons

Tips and tricks

------------------------------------------------

You can contact me at woodenboatdan@gmail.com to share you comments, feedback, stories, and wooden boat adventures.


Keep the bright side up and the barnacled side down - Wooden Boat Dan over and out :D


PS Please note this podcast was recorded several years ago - some of the links, email addresses, phone numbers, and promos mentioned are outdated and no longer valid.


Tämä jakso on lisätty Podme-palveluun avoimen RSS-syötteen kautta eikä se ole Podmen omaa tuotantoa. Siksi jakso saattaa sisältää mainontaa.

Jaksot(215)

HOWB 213 – Interview | Jake Beattie Exec Director NW Maritime Center: R2Ak, Seventy48, Festival, 48 North & More!

HOWB 213 – Interview | Jake Beattie Exec Director NW Maritime Center: R2Ak, Seventy48, Festival, 48 North & More!

Today’s podcast is an interview with Jake Beattie during the 2018 Port Townsend Wooden Boat Festival. Jake is the executive director of the Northwest Maritime Center in Port Townsend. We had fun talki...

31 Elo 34min

HOWB 212 – Interview | Douglas Brooks Japanese Boatbuilder, Author, Researcher, and Student

HOWB 212 – Interview | Douglas Brooks Japanese Boatbuilder, Author, Researcher, and Student

Today’s podcast is an interview with Douglas Brooks during the 2018 Port Townsend Wooden Boat Festival.Doug is a boatbuilder, author, and researcher specializing in the construction of traditional Jap...

24 Elo 41min

HOWB 211 – Interview | Gini Wilson, Nathan Nelson NW School Wooden Boatbuilding; 2019 Australian Wooden Boat Festival Team USA

HOWB 211 – Interview | Gini Wilson, Nathan Nelson NW School Wooden Boatbuilding; 2019 Australian Wooden Boat Festival Team USA

Today’s podcast is an interview with Nathan Nelson and Gini Wilson at the 2018 Port Townsend Wooden Boat Festival at the Northwest Maritime Center.Nathan and Gini discuss their participation in the 20...

17 Elo 37min

HOWB 210 – Interview | Beth Kennedy SCAMP Camp #3 Builder & Wooden Boat Enthusiast

HOWB 210 – Interview | Beth Kennedy SCAMP Camp #3 Builder & Wooden Boat Enthusiast

Today’s podcast is an interview with Beth Kennedy recorded at the 2017 Port Townsend Wooden Boat Festival at the Northwest Maritime Center.Beth talks about how she got into boat building, wooden boats...

10 Elo 29min

HOWB 209 – Wooden Boat Dan Highlights of 2018 Port Townsend Wooden Boat Festival

HOWB 209 – Wooden Boat Dan Highlights of 2018 Port Townsend Wooden Boat Festival

Today’s podcast is me myself and I recording a podcast about the highlights of this year’s Port Townsend Wooden Boat Festival at the Northwest Maritime Center.As usual I had an absolute blast at the f...

3 Elo 29min

HOWB 208 – Interview | Small Craft Advisors’ Josh Colvin and Marty Loken: SCAMP, New Pram Tender, Heather and More!

HOWB 208 – Interview | Small Craft Advisors’ Josh Colvin and Marty Loken: SCAMP, New Pram Tender, Heather and More!

Today’s podcast is an interview I did with Marty Loken and Josh Colvin during the 2017 Port Townsend Wooden Boat Festival. Marty is now associate editor of Small Craft Advisor magazine and having fun ...

27 Heinä 35min

HOWB 207 – Interview | Dillon Majoros, Designer Extraordinaire CLC Boats

HOWB 207 – Interview | Dillon Majoros, Designer Extraordinaire CLC Boats

Today’s podcast is an interview I did with Dillon Majoros during the 2017 Port Townsend Wooden Boat Festival.Dillon attend the Landing School and is a designer at CLC Boats in Annapolis Maryland. He’s...

20 Heinä 30min

HOWB 206 – Interview | Doug Jones Owner 1947 Pacifica Yawl and Traditional Boat Works in Port Townsend

HOWB 206 – Interview | Doug Jones Owner 1947 Pacifica Yawl and Traditional Boat Works in Port Townsend

Today’s podcast is an interview I did with Doug Jones during the 2017 Port Townsend Wooden Boat Festival.Doug is the owner of Traditional Boat Works. He is also the owner of a beautiful 1947 Sparkman ...

13 Heinä 29min

Suosittua kategoriassa Vapaa-aika

nikotellen
antin-matka
ihan-oikeesti
sita
everypodi
unicast
the-harlin-show
tahtitehdas
mutsiputki
20-30-40-podcast
oral-sex
kaikkea-hyvaa
terkuin-jenna
mysteeripodcast
rss-ropettajainhuone
rss-nikotellen
kasper-ja-mikko
pratkapodi
rss-liian-syvalle
murhapaivakirjat