Ep 292: Stainless Steel Benchies, Lego Turing Machines, and a Digital Camera Made of Pure DIY
Hackaday Podcast11 Loka 2024

Ep 292: Stainless Steel Benchies, Lego Turing Machines, and a Digital Camera Made of Pure DIY

Here we are in October, improbably enough, and while the leaves start to fall as the goblins begin to gather, Elliot and Dan took a break from the madness to talk about all the wonderful hacks that graced our pages this week. If there was a theme this week, it was long-term projects, like the multiple years one hacker spent going down dead ends in the quest for DIY metal 3D printing. Not to be outdone, another hacker spent seven years building a mirrorless digital camera that looks like a commercial product. And getting a solderless PCB to do the blinkenlight thing took a long time too.

Looking to eliminate stringing in your 3D prints? Then you'll want to avoid the "pause and attach" approach, which intentionally creates strings in your prints. Wondering if you can 3D print bearings? You can, but you probably shouldn't unless you have a particular use in mind. And what happens when you have an infinitely large supply of Lego? Why, you build a Turing machine on steroids, of course.

Finally, we take a look at this week's "Can't-Miss" articles with a look into plastic recycling and why we can't have nice things yet, and we take a trip out into orbit and examine the ins and outs of Lagrange points.

And a little mea culpa from the editing desk: Sorry the podcast is coming out late this week. Audacity ate my files. If you're ever in a similar circumstance, you can probably halfway save your bacon with audacity-project-tools. Ask me how I know.

Check out the links over at Hackaday.

Tämä jakso on lisätty Podme-palveluun avoimen RSS-syötteen kautta eikä se ole Podmen omaa tuotantoa. Siksi jakso saattaa sisältää mainontaa.

Jaksot(382)

EP 371: Space Computers, Spy Phones, and So Long CHU

EP 371: Space Computers, Spy Phones, and So Long CHU

Elliot Williams is out where the deer and the antelope play for the next week, so it's up to Tom Nardi and Al Williams to wrangle this episode of the Hackaday Podcast. They'll start off by reading som...

29 Touko 1h 19min

Ep 370: Softer Cyberdecks, a Simulated Clutch, and an Overstuffed Mailbox

Ep 370: Softer Cyberdecks, a Simulated Clutch, and an Overstuffed Mailbox

With Elliot back from Hackaday Europe, he and Al Williams had a lot to talk about with two weeks of Hackaday posts to catch up on. Not to mention the mailbag was overflowing. This week, the guys look ...

22 Touko 1h 16min

Ep 369: IR, E-Ink, and Avgas

Ep 369: IR, E-Ink, and Avgas

In this episode, Hackaday Editors Elliot Williams and Tom Nardi start things off by discussing the latest reason that cheap PCB fabrication isn't quite as cheap as it once was. The conversation will t...

8 Touko 1h 8min

Ep 368: A Pencil that Draws Against You, 3D Printing Stuff, and Tablet, Shmablet!

Ep 368: A Pencil that Draws Against You, 3D Printing Stuff, and Tablet, Shmablet!

This week, Hackaday's Elliot Williams and Kristina Panos met up over the international tubes to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the prev...

1 Touko 42min

Ep 367: Radioactive Weather, Continuous Pickles, and Moon Junk

Ep 367: Radioactive Weather, Continuous Pickles, and Moon Junk

When Elliot Williams and Al Williams compare their notes on the week in Hackaday, you know you'll get at least one or two bad puns. How bad? Tune in and find out. This week, Tom Nardi visits several i...

24 Huhti 58min

Ep 366: DOOM on a Toaster, Music in LED Strips, and Old Drives in New Clothes

Ep 366: DOOM on a Toaster, Music in LED Strips, and Old Drives in New Clothes

It's the evening before publication, and a pair of Hackaday writers convene to record the week's podcast. This week Elliot Williams is joined by Jenny List, and it's a bumper episode! Of course, a bit...

17 Huhti 53min

Ep 365: Early 3DP Engineering, a New CAD Interface, and Flying Around the Moon

Ep 365: Early 3DP Engineering, a New CAD Interface, and Flying Around the Moon

Humans flew around the Moon this week, but Hackaday Editors Elliot Williams and Tom Nardi were stuck on Earth -- luckily, there was no shortage of stories and hacks to keep them occupied. From the new...

10 Huhti 1h 22min

Ep 364: Clocks, Cameras, and Free Will

Ep 364: Clocks, Cameras, and Free Will

This week, Hackaday's Elliot Williams and Kristina Panos met up over assorted beverages to bring you the latest news, mystery sound results show, and of course, a big bunch of hacks from the previous ...

3 Huhti 48min

Suosittua kategoriassa Koulutus

rss-murhan-anatomia
psykopodiaa-podcast
voi-hyvin-meditaatiot-2
rss-narsisti
rss-liian-kuuma-peruna
kesken
rss-valo-minussa-2
rss-koira-haudattuna
rss-rahamania
psykologia
rss-vapaudu-voimaasi
rss-arkea-ja-aurinkoa-podcast-espanjasta
rss-hereilla
puhutaan-koiraa
rss-niinku-asia-on
adhd-podi
aamukahvilla
rss-duodecim-lehti
rss-mentalrace
rss-positiivisesti-vittumainen