EP#9: Robots with Feelings

EP#9: Robots with Feelings

**Podcast Notes**

* Parker and Stephen continue work on the [Super Simple Power Supply](https://github.com/MacroFab/SSPS). There is a full on simulation of the analog section on MultiSim.
* Stephen found a better way to control the analog end with two separate 16bit DACs. One controls the negative end and the other one controls the positive end of the ompamp. 16 x 2 Blast Bit Processing!
* Parker is working on a ESP8266 development board for the Parallax Propeller called the [Bit Flicker](https://github.com/LonghornEngineer/Propeller_Development_Bit_Flicker). Will use the [blynk.cc]( http://www.blynk.cc/). This will enable the SSPS to be IoT enabled!
* SAIM Servos arrived. Chassis should be finished by Monday. They past the built in servo "test" routine. See Figure 1.
* Transistor Wars: The Vacuum Tube Strikes Back. [Vacuum channel transistor](http://spectrum.ieee.org/semiconductors/devices/introducing-the-vacuum-transistor-a-device-made-of-nothing) that switches as fast as 460GHz. No substrate for the gate and has a helium vacuum.
* [What is truly a robot?](http://www.theatlantic.com/technology/archive/2016/03/what-is-a-human/473166/) Article states that people talk about robots in a broad fashion. Where “robot” is just used as a metaphor to describe the vast array of automation in the material world. Possible accepted definition of "robot" in academic circles has been: "Sense, think, act." Who is in control of the action? Is a pick and place a robot? See Figure 2.
* [Gallium Oxide substrate for Power Devices.](http://spectrum.ieee.org/semiconductors/materials/gallium-oxide-power-electronics-cool-new-flavor) Has a huge electron-volt band gap of 5eV compared to gallium nitrite which is 3.4eV. Gallium nitrite was what the transistors in the [LittleBox challenge](https://www.littleboxchallenge.com/) where made of. Higher eV allows for a thinner substrate.

For more info and pictures go to our blog!

Jaksot(448)

EP#380: The Simplest SMT Component… In The World

EP#380: The Simplest SMT Component… In The World

MEP EP#380: The Simplest SMT Component… In The WorldStephen’s CNC steps closer to being completed on this CNC electronics centric podcast! We discuss design snafus and problems with poorly constructed...

26 Touko 202347min

EP#379: Taking Pictures with Magnetic Flux

EP#379: Taking Pictures with Magnetic Flux

MEP EP#379: Taking pictures with magnetic fluxTwo major topics this week! Major Box Truck updates and going over the Texas DMC Occupations Code for what a Motor home is. Then we flash back to the year...

20 Touko 20231h 14min

EP#378: Crawfish Conundrum

EP#378: Crawfish Conundrum

MEP EP#378: Crawfish ConundrumCooking crawfish a mile above sea level? How will the crawfish cook differently? On this episode of the MacroFab Engineering Podcast, Parker and Stephen discuss the diffe...

12 Touko 20231h 6min

EP#377: Countdown to Hype

EP#377: Countdown to Hype

MEP EP#377: Countdown to HypeComponent selection for your next product design is difficult as is with having to juggle temperature requirements, supply chain availability problems, and functionality p...

3 Touko 202359min

EP#376: Starting From The Beginning

EP#376: Starting From The Beginning

MEP EP#376: Starting From The BeginningWhen did you start listening to the podcast? Have a favorite episode? Let Stephen and Parker know which is your favorite. Also, we are going to do another design...

26 Huhti 202359min

EP#375: From Zero to Hero in Python

EP#375: From Zero to Hero in Python

MEP EP#375: From Zero to Hero in PythonTopics:Why is python requested in embedded software/firmware engineer jobs?The Complete Python Bootcamp From Zero to Hero in Python - UdemyRapid Harness Software...

19 Huhti 20231h 2min

EP#374: Brandon Sander of Inheritance Machining

EP#374: Brandon Sander of Inheritance Machining

MEP EP#374: Brandon Sander of Inheritance MachiningBrandon Sander:Classically trained in mechanical engineering, Brandon inherited his grandfather’s personal machine shop in the winter of 2021. He cre...

14 Huhti 20231h 4min

EP#373: Full Stack Manufacturing - David and Joel of Teenage Engineering

EP#373: Full Stack Manufacturing - David and Joel of Teenage Engineering

Joel Westerberg is head of IT at teenage engineering. Joel started at teenage engineering in 2013 by working on the OD-11 loudspeaker project. Joel has been involved in building the teenage engineerin...

5 Huhti 20231h 18min

Suosittua kategoriassa Tiede

tiedekulma-podcast
rss-mita-tulisi-tietaa
rss-poliisin-mieli
docemilia
radio-antro
utelias-mieli
rss-sosiopodi
ihanat-ipanat
mielipaivakirja
filocast-filosofian-perusteet
rss-bios-podcast
rss-laakaripodi
rss-radplus
rss-opeklubi