EP#13: Picture Books for Engineers

EP#13: Picture Books for Engineers

Podcast Notes

  • Our guest this week is Dustin Holliday, a Production Line Engineer at MacroFab, INC. Dustin programs the My200 paste jetter, the My500 pick and place, and the Rhythm Selective Solder. See Figure 1.
  • Stephen is working on a customers test fixture and is using the Parallax Propeller. He really likes how it is easy to route the package since each pin is just general I/O and you can change around the pin definitions.
  • Parker is almost done with the first test fixture article. Should be out soon.
  • Parker has also been testing the ESP-12E WiFi module which uses the ESP8266 IC. Seems that some USB ports don't provide enough power even though they enumerate for 500mA at 5V. The ESP-12E is on his Prop Dev Stick Bit Flicker. Code is a port of Bylnk written by Roy Eltham. See Figure 2.
  • On the Prop Fan board Parker has been working on he needed to read an analog signal without a ground reference. Instead of setting up an isolated supply and an isolated data buss he is going to try an isolated opamp. Part number ACPL-C870-000E. Have to compress the 0-14V input range to 0-2V with a voltage divider but Parker isn't looking for high resolution.
  • Stephen and Parker are probably overly excited about the fact that Digi-Key now has pictures for categories on the connectors page.
  • Another ink to circuit board project via paint pen project. This pops up every 6 to 87 months but this time they solved some of the technical issues but not all of them.
  • The Current Source, an engineer out of Florida sent us a crappy Kickstarter idea! He calls it the "Microprocessor Launchpad" and it is basically a DIY kit for making your own microprocessors from scratch. Included is a sheet of metal, micro drill bits, some bond wire, and a sharpie. Stretch goals include silicon wafers and a hack saw to cut out your die.

Jaksot(448)

EP#412: Great Classes, Odd Teachers, Chickens, Snakes

EP#412: Great Classes, Odd Teachers, Chickens, Snakes

A recent Circuit Break Community thread about K-map design inspired a tangential conversation about how well certain subjects are taught in college. Parker and Stephen love a good tangent, thank you, ...

9 Tammi 202450min

EP#411: Entropy rules everything with James Lewis

EP#411: Entropy rules everything with James Lewis

This week Parker and Stephen welcome James Lewis back to the show after a rather long absence! The occasion stems from James chiming in on a Circuit Break Community thread that Stephen started, asking...

2 Tammi 20241h 1min

EP#410: Eighth Annual MacroFab Star Wars Christmas Special - Somehow this Podcast Returned

EP#410: Eighth Annual MacroFab Star Wars Christmas Special - Somehow this Podcast Returned

Not unlike Han Solo emerging from cryosleep, the annual MacroFab Star Wars Christmas Special is back! Parker and Stephen welcome Josh Rozier, Chris Kraft, and Hyr0n to Circuit Break for a wide-ranging...

26 Joulu 20232h 46min

EP#409: You Down with SDV

EP#409: You Down with SDV

Parker and Stephen discuss a recent news story about how car manufacturers are increasing their focus on Software-Defined Vehicles (SDVs) which are cars that use more software instead of physical comp...

19 Joulu 202354min

EP#408: Pete Staples from Blue Clover on the PLT, Device Testing, more!

EP#408: Pete Staples from Blue Clover on the PLT, Device Testing, more!

Parker and Stephen welcome Pete Staples, the CEO and Co-Founder of Blue Clover Devices, to the show! Staples founded Blue Clover in 2003 to explore ways to make the electronics industry more efficient...

12 Joulu 202356min

EP#407: Holy Static Hazard Batman!

EP#407: Holy Static Hazard Batman!

Parker and Stephen discuss a recent article exploring how electrostatic discharge damage isn’t the only kind of static hazard your digital designs can face and possible solutions to such problems, a r...

5 Joulu 202356min

EP#406: Dr. Duncan Haldane from JITX on Automating Circuit Design

EP#406: Dr. Duncan Haldane from JITX on Automating Circuit Design

Parker and Stephen welcome JITX CEO and Co-founder, Dr. Duncan Haldane, to the show to discuss his company, which is a code-powered PCB design platform that aims to revolutionize circuit board design ...

28 Marras 20231h 7min

EP#405: Does ChatGPT want a cold beer?

EP#405: Does ChatGPT want a cold beer?

Parker and Stephen discuss the fact that physical limitations of shrinking process nodes are leading to new advancements in silicon interposers and enabling 2.5D packaging architectures, which is maki...

21 Marras 202345min

Suosittua kategoriassa Tiede

tiedekulma-podcast
rss-mita-tulisi-tietaa
rss-poliisin-mieli
docemilia
utelias-mieli
radio-antro
filocast-filosofian-perusteet
rss-sosiopodi
ihanat-ipanat
mielipaivakirja
rss-bios-podcast
rss-duodecim-lehti
rss-laakaripodi
rss-radplus
rss-opeklubi
rss-lihavuudesta-podcast