EP#16: Fixtures of Echoing Tubes

EP#16: Fixtures of Echoing Tubes

Hosts:
Parker Dillmann
Stephen Kraig

Guests:
N/A

Figure 1: Non working Space Echo RE-201 Figure 2: A NuTube 6P1 straight from KORG. Figure 3: The constant current source Stephen is using for his NuTubes. The equation for the constant current is I ~ Vgs/Rs. Figure 4: Jig of Destiny 3D render.

Podcast Notes

  • Parker really wants to get Josh's (the sound guy) Space Echo RE-201 working. There is a digital filter that simulates the effect though. See figure 1.
  • Stephen received his NuTube's from KORG this week. See figure 2.
  • To run the tubes, Stephen is going to use a constant current power supply like on page 229 in "Designing High-Fidelity Valve Preamps" by Merlin Blencowe. Stephen really likes this book. See figure 3 for the schematic.
  • Parker has been working on the "Jig Of Destiny" which is a aluminum fixture that is designed to support the large 16" x 16" panels used for prototype builds at MacroFab. Test version was made out of 10mm x 10mm MakerBeam material. Production version will be machined out of 3/16" aluminum to be extra rigid. See figure 4 for a 3D render of the fixture.
  • Parker's new board was completed by MacroFab today. It is a fan and system controller for his Jeep. Hardware and software will be open source as always. Picture of the board can be seen here.
  • While testing the PCB board, Parker noticed there was a 0.03V over the power cables. Stephen calculated it out. See below for the calculations. The drop is most likely coming from the spring contact in the clip.
  • Bolt.io has a nice article about hardware and startup jargon used in the industry. Parker and Stephen pick through it.
  • Stephen and Parker rant about connector datasheets again. This time about connectors that need multiple parts to be used. Example of this would be connectors that have separate conductor pins.
  • Amazon released a programmable version of their IoT Button.
  • The MOnSter 6502 is a discrete level 6052 CPU. Parker thought it would be bigger. It has over 4000 discrete transistors.
  • On the note of 6502 CPUs, there is a really cool visual 6502 online simulator.
  • Stephen and Parker discuss where debouncing a switch should be don

Jaksot(448)

EP#8: Bits That Don’t Quit

EP#8: Bits That Don’t Quit

Podcast NotesStephen and Parker do a live discussion on how the digital and analog side of the Super Simple Power Supply will interface with each other. MultiSim has been a huge part in simulating the...

25 Maalis 201639min

EP#7: The Art of Retention Force

EP#7: The Art of Retention Force

Parker has almost finalized the front panel design for the Super Simple Power Supply. Going to have a "VU" meter for how much power it is pulling.Parker is also still looking for a proper encoder that...

18 Maalis 201624min

EP#6: Mythical Transistors

EP#6: Mythical Transistors

Podcast NotesParker is still working on the Super Simple Power Supply. He is designing the front panel. He is considering using some WP1043 Kingbright LEDs.Super Simple Power Supply will have two deci...

11 Maalis 201625min

EP#5: Tilting Tubes

EP#5: Tilting Tubes

Parker ordered all the parts for the SAIM this week. The v-slot rails and brackets from OpenBuild, iES-1706 servos from Leadshine, and 3D printed parts from Shapeways.MacroFab uses 3D printed parts to...

4 Maalis 201647min

EP#4: Linear Effects of Licensing

EP#4: Linear Effects of Licensing

Audio quality of the podcast leveled up! Stephen and Parker went over to The Pharmacy Recording Studio which is run by Josh Moore. He hooked them up with 2 (!) microphones and a nice an acoustically p...

26 Helmi 201617min

EP#3: Liquid Toroidal Electrons

EP#3: Liquid Toroidal Electrons

Stephen and Parker have been testing the main opamp for the OPA541. Stephen wrote a blog post detailing the opamp tests with simulation and real world testing.GitHub link to the repository for the SSP...

19 Helmi 201622min

EP#2: Mechanical MultiSIM Monsters

EP#2: Mechanical MultiSIM Monsters

Stephen continues his work on the Stupid Simple Power Supply (SSPS). He decided to go digital voltage control over analog. Also he has been trying out MultiSIM BLUE by Mouser for circuit simulation. S...

10 Helmi 201620min

EP#1: Opamp-timal Power Supply

EP#1: Opamp-timal Power Supply

Stephen talks about the Stupid Simple Power Supply (SSPS). He designed a OPA541 breakout board for testing. See figure 1.OPA541 Datasheet : Street price of $21.88.Parker brings up that blinky LEDs are...

9 Helmi 201623min

Suosittua kategoriassa Tiede

rss-mita-tulisi-tietaa
rss-poliisin-mieli
rss-duodecim-lehti
tiedekulma-podcast
rss-lihavuudesta-podcast
utelias-mieli
docemilia
mielipaivakirja
radio-antro
rss-opeklubi
sotataidon-ytimessa
hippokrateen-vastaanotolla
rss-laakaripodi
rss-mental-race
rss-luontopodi-samuel-glassar-tutkii-luonnon-ihmeita
rss-sosiopodi