EP#59: Grass Fed PCBs

EP#59: Grass Fed PCBs

Podcast Notes

  • MacroFab and Mouser Electronics have teamed up to create a free monthly meetup in Houston for anyone involved with hardware & electronics engineering or manufacturing. Hosted on the last Wednesday of every month, these meetups are designed to build a community of professionals who want to learn from one another, gain new insights on emerging electronics technologies, and expand their network.
    • Sign up here!
    • What to expect
      • Networking
      • Fireside chats with Q&A
      • Individual project sharing and discussion
      • Door prizes
      • Refreshments
      • Free parking
  • Christian Aurich writes: "Could you talk about differences in surface finishes on PCBs? I am especially wondering what difference ENIG makes to other 'flat' finishes... so everything else than HAL."
    • HASL (Leadfree and Leaded)
    • ENIG
    • Immersion Tin
    • Immersion Silver
    • OSP (Organic Solderability Preservative)
    • Gold - Hard Gold
    • PDF on pros and cons
  • Parker
    • Working on a LVDS output board for the RPI 3
    • Parallel Display Interface on the RPI3
    • Config.txt parameters and by enabling the correct Linux Device Tree
    • Using the Ti DS90C365A. It converts a RGB666 signal to a LVDS signal for LCD panels. You give it 6 bits for ever color, pixel clock, H clock and V clock and poof LVDS.
  • Stephen
    • Bench Stats:
      • 80/20 construction
      • 1 5/8" plastic laminate table top
      • 60"x30" with adjustable height between 30.625" to 32.625"
      • Total Length of 80/20 per bench: 40.33 feet
      • 42 angle brackets
      • 84 nuts/bolts
      • ~68.5 lbs
  • Particles from outer space are wreaking low-grade havoc on personal electronics
    • Click bait? In many instances, however, these operational failures may be caused by the impact of electrically charged particles generated by cosmic rays that originate outside the solar system.
    • This is called a single-event upset or SEU
    • SEU failure rates for consumer electronic devices performed by Ritesh Mastipuram and Edwin Wee at Cypress Semiconductor on a previous generation of technology shows how prevalent the problem may be. Their results were published in 2004 in Electronic Design News and provided the following estimates:
      • A simple cell phone with 500 kilobytes of memory should only have one potential error every 28 years.
      • A router farm like those used by Internet providers with only 25 gigabytes of memory may experience one potential networking error that interrupts their operation every 17 hours.
      • A person flying in an airplane at 35,000 feet (where radiation levels are considerably higher than they are at sea level) who is working on a laptop with 500 kilobytes of memory may experience one potential error every five hours.
    • The engineer's bottom line: "This is a major problem for industry and engineers, but it isn't something that members of the general public need to worry much about."

Special thanks to whixr over at Tymkrs for the intro and outro!

Jaksot(448)

EP#8: Bits That Don’t Quit

EP#8: Bits That Don’t Quit

Podcast NotesStephen and Parker do a live discussion on how the digital and analog side of the Super Simple Power Supply will interface with each other. MultiSim has been a huge part in simulating the...

25 Maalis 201639min

EP#7: The Art of Retention Force

EP#7: The Art of Retention Force

Parker has almost finalized the front panel design for the Super Simple Power Supply. Going to have a "VU" meter for how much power it is pulling.Parker is also still looking for a proper encoder that...

18 Maalis 201624min

EP#6: Mythical Transistors

EP#6: Mythical Transistors

Podcast NotesParker is still working on the Super Simple Power Supply. He is designing the front panel. He is considering using some WP1043 Kingbright LEDs.Super Simple Power Supply will have two deci...

11 Maalis 201625min

EP#5: Tilting Tubes

EP#5: Tilting Tubes

Parker ordered all the parts for the SAIM this week. The v-slot rails and brackets from OpenBuild, iES-1706 servos from Leadshine, and 3D printed parts from Shapeways.MacroFab uses 3D printed parts to...

4 Maalis 201647min

EP#4: Linear Effects of Licensing

EP#4: Linear Effects of Licensing

Audio quality of the podcast leveled up! Stephen and Parker went over to The Pharmacy Recording Studio which is run by Josh Moore. He hooked them up with 2 (!) microphones and a nice an acoustically p...

26 Helmi 201617min

EP#3: Liquid Toroidal Electrons

EP#3: Liquid Toroidal Electrons

Stephen and Parker have been testing the main opamp for the OPA541. Stephen wrote a blog post detailing the opamp tests with simulation and real world testing.GitHub link to the repository for the SSP...

19 Helmi 201622min

EP#2: Mechanical MultiSIM Monsters

EP#2: Mechanical MultiSIM Monsters

Stephen continues his work on the Stupid Simple Power Supply (SSPS). He decided to go digital voltage control over analog. Also he has been trying out MultiSIM BLUE by Mouser for circuit simulation. S...

10 Helmi 201620min

EP#1: Opamp-timal Power Supply

EP#1: Opamp-timal Power Supply

Stephen talks about the Stupid Simple Power Supply (SSPS). He designed a OPA541 breakout board for testing. See figure 1.OPA541 Datasheet : Street price of $21.88.Parker brings up that blinky LEDs are...

9 Helmi 201623min

Suosittua kategoriassa Tiede

rss-mita-tulisi-tietaa
rss-poliisin-mieli
rss-duodecim-lehti
tiedekulma-podcast
rss-lihavuudesta-podcast
utelias-mieli
docemilia
mielipaivakirja
radio-antro
rss-opeklubi
sotataidon-ytimessa
hippokrateen-vastaanotolla
rss-laakaripodi
rss-mental-race
rss-luontopodi-samuel-glassar-tutkii-luonnon-ihmeita
rss-sosiopodi