MEP EP#322: Measuring up Your Interview Questions

MEP EP#322: Measuring up Your Interview Questions

MEP EP#322: Measuring up Your Interview Questions

Previous Podcast where we discussed Engineering Resumes

Interviewer Questions and Techniques?

  • Stephen
    • Schematic PDF for the test
    • There is no output when a 10Vp-p signal is injected into the input. Turning the pot or applying a voltage to the input cv jack does not have any effect on the output. It is stuck at zero volts.
      • Alternate – What if the output was stuck at + or – 11V?
    • The output is stuck at unity gain. 10VPP in results in 10VPP out. The pot and CV controls do nothing to adjust the output level.
    • The unit seems to work for all controls other than the CV offset input. That seems to only be unipolar. Positive voltage does not have an effect but negative voltage does.
      • Hint: The output of U5.1 with zero volts in is reading zero volts.
      • Bonus – What is the input range for the cv input if the microprocessor has an input range of 3.3V?
    • The unit turns on and trips the constant current trigger on the power supply – What do you do?
    • What is the input impedance of both the signal input and the CV input?
      • What is the output impedance?
    • What is the purpose of C1, C2, and C3?
      • What is their cutoffs?
    • What does R2 do in this circuit?
  • Parker
    • Resume
    • Data Support Technicians
    • Test Engineers
    • Putting together test question / examples

PCB Ruler

  • Don’t want to do just a normal one
  • What do engineers actually want on these?

Jaksot(448)

EP#412: Great Classes, Odd Teachers, Chickens, Snakes

EP#412: Great Classes, Odd Teachers, Chickens, Snakes

A recent Circuit Break Community thread about K-map design inspired a tangential conversation about how well certain subjects are taught in college. Parker and Stephen love a good tangent, thank you, ...

9 Tammi 202450min

EP#411: Entropy rules everything with James Lewis

EP#411: Entropy rules everything with James Lewis

This week Parker and Stephen welcome James Lewis back to the show after a rather long absence! The occasion stems from James chiming in on a Circuit Break Community thread that Stephen started, asking...

2 Tammi 20241h 1min

EP#410: Eighth Annual MacroFab Star Wars Christmas Special - Somehow this Podcast Returned

EP#410: Eighth Annual MacroFab Star Wars Christmas Special - Somehow this Podcast Returned

Not unlike Han Solo emerging from cryosleep, the annual MacroFab Star Wars Christmas Special is back! Parker and Stephen welcome Josh Rozier, Chris Kraft, and Hyr0n to Circuit Break for a wide-ranging...

26 Joulu 20232h 46min

EP#409: You Down with SDV

EP#409: You Down with SDV

Parker and Stephen discuss a recent news story about how car manufacturers are increasing their focus on Software-Defined Vehicles (SDVs) which are cars that use more software instead of physical comp...

19 Joulu 202354min

EP#408: Pete Staples from Blue Clover on the PLT, Device Testing, more!

EP#408: Pete Staples from Blue Clover on the PLT, Device Testing, more!

Parker and Stephen welcome Pete Staples, the CEO and Co-Founder of Blue Clover Devices, to the show! Staples founded Blue Clover in 2003 to explore ways to make the electronics industry more efficient...

12 Joulu 202356min

EP#407: Holy Static Hazard Batman!

EP#407: Holy Static Hazard Batman!

Parker and Stephen discuss a recent article exploring how electrostatic discharge damage isn’t the only kind of static hazard your digital designs can face and possible solutions to such problems, a r...

5 Joulu 202356min

EP#406: Dr. Duncan Haldane from JITX on Automating Circuit Design

EP#406: Dr. Duncan Haldane from JITX on Automating Circuit Design

Parker and Stephen welcome JITX CEO and Co-founder, Dr. Duncan Haldane, to the show to discuss his company, which is a code-powered PCB design platform that aims to revolutionize circuit board design ...

28 Marras 20231h 7min

EP#405: Does ChatGPT want a cold beer?

EP#405: Does ChatGPT want a cold beer?

Parker and Stephen discuss the fact that physical limitations of shrinking process nodes are leading to new advancements in silicon interposers and enabling 2.5D packaging architectures, which is maki...

21 Marras 202345min

Suosittua kategoriassa Tiede

rss-mita-tulisi-tietaa
rss-poliisin-mieli
rss-duodecim-lehti
tiedekulma-podcast
rss-lihavuudesta-podcast
docemilia
utelias-mieli
mielipaivakirja
radio-antro
sotataidon-ytimessa
filocast-filosofian-perusteet
rss-laakaripodi
rss-mental-race
rss-opeklubi
rss-luontopodi-samuel-glassar-tutkii-luonnon-ihmeita
rss-sosiopodi