MEP EP#335: Your Toaster is Toast

Hosts: Parker Dillmann Stephen KraigGuests: N/A Figure 1: Non working Space Echo RE-201 Figure 2: A NuTube 6P1 straight from KORG. Figure 3: The constant current source Stephen is using for his NuTub...

20 Touko 201643min

Hosts: Parker Dillmann Stephen KraigGuests: N/A Figure 1: SSPS front panel test layout. Miniature version of the real front panel to test physical placement and new parts. Figure 2: Two TPS65982-EVM b...

13 Touko 201633min

Hosts: Parker Dillmann Stephen KraigGuests: N/AFigure 1: SSPS front panel layout. Traces to come soon. Figure 2: Inconsistencies in the LTST-C171CKT datasheets.Podcast NotesStephen is still working on...

6 Touko 201635min

Podcast NotesOur guest this week is Dustin Holliday, a Production Line Engineer at MacroFab, INC. Dustin programs the My200 paste jetter, the My500 pick and place, and the Rhythm Selective Solder. See...

29 Huhti 201640min

Podcast NotesStephen built a power supply for an old school tube microphone for Josh. Josh does the recordings for the Podcast. See Figure 1 for the schematic.Microphone is a Sony C37 tube condenser m...

22 Huhti 201630min

Podcast NotesParker has been hard at work on the PinHeck Test Fixture. It uses over 160 pogo pins to test every single function of the PinHeck Pinball System. There will be an article about designing ...

15 Huhti 201637min

Podcast NotesFirst Guest for the MacroFab Engineering Podcast! Trey German is working on a IoT platform using BLE and a small coin cell.Trey's device worked on the first revision! How often does that ...

8 Huhti 201641min

**Podcast Notes*** Parker and Stephen continue work on the [Super Simple Power Supply](https://github.com/MacroFab/SSPS). There is a full on simulation of the analog section on MultiSim.* Stephen foun...

1 Huhti 201636min