The Bond and Ground Podcast | E9 | SSBJ vs EGC and How They Differ

Grounding and Bonding Course – 2023 NEC® Mastery for Electricians The Grounding and Bonding Course at FastTraxSystem.com is the most comprehensive and technically accurate online training program available for mastering electrical grounding and bonding systems under the 2023 National Electrical Code (NEC®). This course goes far beyond basic grounding theory. It provides real-world application of Article 250, including a deep technical breakdown of:

• Equipment Grounding Conductors (EGCs)
• Supply-Side Bonding Jumpers (SSBJs)
• Main Bonding Jumpers
• System Bonding Jumpers
• Grounded Conductor bonding
• Service vs. feeder grounding
• Separately Derived Systems (SDS)
• Effective ground-fault current paths
• Bonding of enclosures, raceways, and structural metal
• Sizing rules using Tables 250.122 and 250.102(C)(1)

Students learn how and why grounding and bonding rules exist, how fault current flows, and how to properly design and install grounding systems that meet 2023 NEC compliance, improve system safety, and eliminate costly inspection failures. This course is ideal for:

• Journeyman Electricians
• Master Electricians
• Electrical Inspectors
• Electrical Engineers
• Electrical Contractors
• Apprentices preparing for licensing exams

⚡ What Makes This Course Different Unlike generic grounding classes, this program teaches the engineering logic of fault-current return paths, explains the difference between service-side bonding and load-side grounding, and clearly distinguishes when conductors are classified as SSBJs vs EGCs — a topic that causes massive confusion in the field. You will master:

• Proper bonding on the line side of the service disconnect
• Correct sizing of supply-side bonding jumpers
• When Table 250.122 does and does not apply
• How NEC grounding rules interact with overcurrent device operation
• How improper bonding leads to dangerous voltage on metal enclosures

By the end of this course, you will understand grounding and bonding at the same technical level as electrical engineers, inspectors, and code panel members. 🧠 Why This Training Matters Improper grounding and bonding is one of the leading causes of electrical shock hazards, equipment damage, nuisance tripping, and failed inspections. Mastery of grounding and bonding is required for:

• Safe fault-current operation
• Proper breaker clearing
• Elimination of stray voltage
• Lightning and surge control
• Reliable electrical system performance

This course gives you complete command of NEC Article 250 so you can install with confidence and pass inspections on the first attempt.

🎯 Optimized Description: Learn NEC 2023 grounding and bonding. Master EGCs, supply-side bonding jumpers, Article 250, fault current paths, and pass electrical inspections.

🧩 Optimized Short Course Summary: Master electrical grounding and bonding using the 2023 NEC®. Learn Article 250, EGCs, supply-side bonding jumpers, fault-current paths, and inspection-proof installations.

🧱 Primary Keywords

• grounding and bonding course
• NEC grounding and bonding
• Article 250 training
• electrical grounding class
• equipment grounding conductor
• supply-side bonding jumper
• grounding for electricians
• bonding for electricians
• NEC 2023 grounding and bonding
• how to size equipment grounding conductor
• how to size bonding jumper
• service grounding vs feeder grounding
• effective ground fault current path
• NEC Article 250 explained
• electrical code grounding requirements
• grounding and bonding for inspectors
• electrical grounding certification

Become a supporter of this podcast: https://www.spreaker.com/podcast/electrify-electrician-podcast--4131858/support.