What is Resistance to Ground Measurement? (Part 2)

What is Resistance to Ground Measurement? (Part 2)

In this episode, E&S Grounding Solutions President David Stockin concludes a two-part series on resistance to ground measurements by discussing the induced frequency test, often called the “Clamp-On Method." In this method, a comparison is made between an induced current and a return current, while the test voltage is held constant. When the meter is clamped on to an electrode that is in series with a massive resistance loop with many parallel resistances, the meter can display a re...

Episoder(29)

What are 4 Lightning Scenarios that Cause Problems? Part 5

What are 4 Lightning Scenarios that Cause Problems? Part 5

In this episode, E&S Grounding Solutions President David Stockin discusses Part 5 of a 5-part series about lightning strike scenarios and the ways to protect against them. In the previous four episode...

28 Des 202216min

What are 4 Lightning Scenarios that Cause Problems? Part 4

What are 4 Lightning Scenarios that Cause Problems? Part 4

In this episode, E&S Grounding Solutions President David Stockin discusses Part 4 of a 5-part series about lightning strike scenarios and the ways to protect against them. Direct lightning strikes are...

14 Des 20228min

What are 4 Lightning Scenarios that Cause Problems? Part 3

What are 4 Lightning Scenarios that Cause Problems? Part 3

In this episode, E&S Grounding Solutions President David Stockin discusses Part-3 of a 5-part series about lightning strike scenarios and the ways to protect against them. Ground strikes are the seco...

21 Okt 20227min

What are 4 Lightning Scenarios that Cause Problems? Part 2

What are 4 Lightning Scenarios that Cause Problems? Part 2

In this episode, E&S Grounding Solutions President David Stockin discusses Part-2 of a 5-part series about lightning strike scenarios and the ways to protect against them. Ground strikes are the secon...

4 Okt 20226min

What are 4 Lightning Scenarios that Cause Problems? Part 1

What are 4 Lightning Scenarios that Cause Problems? Part 1

In this episode, E&S Grounding Solutions President David Stockin discusses Part-1 of a 5-part series about lightning strike scenarios and the ways to protect against them. Air-to-Air strikes are the ...

16 Sep 20228min

What are Ground Loops?

What are Ground Loops?

E&S Grounding Solutions President David Stockin responds to viewers' questions about the differences between ground “loops” and ground “rings”. Ground loops are a common term that is often ill defined...

29 Jun 20229min

How Can Step-Voltage Accidents be Prevented?

How Can Step-Voltage Accidents be Prevented?

In this episode, E&S Grounding Solutions President David Stockin responds to viewers questions about the dangers of Step Voltages. Step voltages are a very dangerous and unseen hazard. Primarily cause...

19 Mai 20228min

The Importance of Addressing Grounding Systems at the Beginning of the Project

The Importance of Addressing Grounding Systems at the Beginning of the Project

In this episode, E&S Grounding Solutions President DavidStockin goes into detail on the importance of addressing your grounding system during the design process and how not doing so can cause costs to...

28 Apr 202214min

Populært innen Fakta

fastlegen
dine-penger-pengeradet
relasjonspodden-med-dora-thorhallsdottir-kjersti-idem
rss-strid-de-norske-borgerkrigene
treningspodden
jakt-og-fiskepodden
rss-sunn-okonomi
smart-forklart
foreldreradet
merry-quizmas
sinnsyn
gravid-uke-for-uke
rss-var-forste-kaffe
hverdagspsyken
tomprat-med-gunnar-tjomlid
rss-adhd-i-klasserommet
aldring-og-helse-podden
fryktlos
rss-kull
rss-kunsten-a-leve