Chapter 19: The Evaporator and Expansion Valve
After straying away for a bit to focus on “Cool Talk”, Jens gets back on the educational track here in Chapter 19. This episode addresses the “cool” part of the cooling system: the evaporator, the eva...
31 Jan 202017min
Cool Talk: Glenn Moore’s Winter Blues
In this special wintery edition of Chilling with Jens, our host dives back into the written works of Glenn Moore. This time around, the focus is on how compressors and condensers operate during the wi...
17 Des 201911min
Cool Talk: Liquid Injection in Optyma™ Plus P02
The Danfoss Optyma™ Plus condensing unit is ideally suited for use in locations with high ambient temperatures. However, when you combine the naturally high environmental heat with the use of a new re...
30 Nov 201910min
Cool Talk: Glenn Moore and the condenser
Jens dug through the Danfoss archives and found four articles written by Glenn Moore, longtime Danfoss Technical Field Service and Support Manager. In this episode, Jens reads through each one to reve...
1 Nov 201912min
Cool Talk: CO2 as refrigerant in larger commercial systems
This podcast is about the use of CO2 or carbon dioxide as a refrigerant in larger commercial systems like supermarkets or hypermarkets. CO2 or carbon dioxide, is a natural occurring substance, a natur...
20 Sep 201913min
Cool Talk: Global trends on refrigerants
Cool Talk: Interview with Norbert Blatz on switching to low-GWP refrigerants. Norbert tells us what you need to know when performing a retrofit in an existing system, what considerations you need to ...
18 Sep 201922min
Cool Talk: Charging new refrigerant
In this episode Jens talks about the things to consider when charging new refrigerant into an existing system, what to think of, what to do, and what not to do. You can do the shift in charge from HFC...
16 Sep 201910min
Cool Talk: Why compressors fail
Why compressors fail: John Broughton, Danfoss Global Application Specialist, joins Jens for a special edition of the podcast. They discuss the most common reasons compressors fail and how to avoid th...
26 Aug 201913min
