Understanding Boolean Data Types and Using the Boolean NOT (!) operator to Switch Arduino Pin States

Discussion: Before you begin using the Arduino IDE, you must first learn how to download, install, and set your preferences.  This lesson is specifically tailored for those who use a PC.  The next les...

19 Mars 20177min

Discussion: The following videos will show you step by step how to download and install the Arduino Integrated Development Environment, or IDE for short. We'll also be setting up some preferences in ...

18 Mars 20172min

Discussion: Before we can start diving into programming the microcontroller on the Arduino, we need to have a solid understanding of the tools used to make it happen.  Therefore, in this particular le...

17 Mars 20172min

Discussion: In this video, I'll explain what parts you'll need to complete this Arduino Crash Course. Immediately below this discussion section, there is a summary checklist of links for these parts. ...

16 Mars 20177min

Open Source Hardware Group is now Programming Electronics Academy - we rebranded!

15 Mars 20171min

Check out our Premium Arduino Training Course.

14 Mars 20172min

If Statement (and else-if), Comparison Operators and Conditions In the last lesson, we learned about the if statement. The if statement was the perfect choice for setting up instructions to run only w...

13 Mars 201714min

Let's expand the repertoire of output that we can use by looking at the function analogWrite(). I experienced much confusion with analogWrite(), because I suspected that it had to do with the analog p...

13 Mars 201720min