EP#134: Injection Molded Enclosure Design with John Teel

EP#134: Injection Molded Enclosure Design with John Teel

  • John Teel
  • Injection Molding Enclosure Design
    • What is the general process of injection molding?
    • Challenges of Injection Molding: Why does it have this “mystic” aura around it?
    • Designing enclosures for injection molding?
      • Difference between designing for 3D printing and Injection molding
      • What should you look for if you need to get a design done correctly
      • What files will I need to have created?
      • Do I design the mold or does someone else?
    • Design is done. Who do I look for to get my design built?
      • What questions should I have answered before contacting someone?
      • Who do I talk to to get it done?
      • How do I find a manufacturer locally or overseas?
      • Who owns the mold?
      • Should I go with a more expensive/larger mold or cheaper/smaller?
      • How much should I be prepared to spend?
    • Prototyping
      • TL;DR for prototyping an injection molded enclosure
      • What if I want a sample?
      • How do I pick the right material?

Tags: electronics podcast, injection molding, John Teel, MacroFab, macrofab engineering podcast, MEP, Predictable Designs

Avsnitt(448)

EP#140: The Genesis of My Bill Of Materials

EP#140: The Genesis of My Bill Of Materials

ParkerRTL SDR functional setup? RTL-FMSeems to work fine for FM stuffAM works in direct sampling mode but I can’t seem to get that to work with RTL-FM Upconverter needed?Auto switching signals?RTL_FM ...

2 Okt 201859min

EP#139: Breaking Bad Taps

EP#139: Breaking Bad Taps

ParkerDiagnosing power drops in the WagonRTL SDR update? RTL-SDR for the Raspberry PiMaybe a Live twitch session with some seasoned Python / SDR Peeps?Wrote about PCB Stackups for the MacroFab knowled...

26 Sep 201848min

EP#138: MacroFab Design Contest: Blink an LED – MEP Favorite

EP#138: MacroFab Design Contest: Blink an LED – MEP Favorite

We would like to thank everyone that entered into the MacroFab Design Contest: Blink an LED Sponsored by Mouser Electronics. The winner for the Pragmatic Blinky was Dillon with the  Disintegrated LM39...

19 Sep 201843min

EP#137: Vector Simulations for Samsung Capacitors

EP#137: Vector Simulations for Samsung Capacitors

Before we get started I would like to thank everyone that entered into the MacroFab Design Contest: Blink an LED Sponsored by Mouser Electronics. The judges are going through the entries this week and...

12 Sep 201850min

EP#136: Classy NASCAR Badgelife

EP#136: Classy NASCAR Badgelife

ParkerWagon Chime Module Experimented with brake clean and that seemed to not remove the finishAny other suggestions?Wagon Powered Mirror Module Schematic complete and Board laid outUsed DRV8872 motor...

5 Sep 201856min

EP#135: The Hamster That Chirps

EP#135: The Hamster That Chirps

ParkerWagon Chime module Two ICS MC14001BMC14069Interesting metal can for a speaker moduleTwo transistors in a push pull configurationReplaced electrolytic caps and it kinda functionsPowered Mirror Ci...

29 Aug 201852min

EP#133: Tales From an Electrical Engineer – Ideas on Mechanical Design

EP#133: Tales From an Electrical Engineer – Ideas on Mechanical Design

ParkerBuilding the electronics for the Thermal DetonatorArduino NanoLM386 amplifierPinHeck REV8 update! PCM5122 moving on PCBFabricating a rear window wiper for the Wagon Forum post on modifying a Dod...

15 Aug 20181h 2min

Populärt inom Vetenskap

p3-dystopia
svd-nyhetsartiklar
pojkmottagningen
dumma-manniskor
allt-du-velat-veta
kapitalet-en-podd-om-ekonomi
det-morka-psyket
rss-vetenskapsradion
rss-experimentet
rss-ufo-bortom-rimligt-tvivel
paranormalt-med-caroline-giertz
medicinvetarna
rss-vetenskapsradion-2
bildningspodden
halsorevolutionen
dumforklarat
vetenskapsradion
rss-broccolipodden-en-podcast-som-inte-handlar-om-broccoli
4health-med-anna-sparre
rss-spraket