Benefits and Challenges of Glass-Lined Equipment

Benefits and Challenges of Glass-Lined Equipment

In our inaugural episode, co-hosts Heather Allain and Marc Cook sit down with Lisa Desai, director of technology sales at Pfaudler, to discuss glass-lined equipment. The three have an engaging conversation wrapped around the firing process, the art of spraying glass, benefits and value of using glass as a construction material, and discussions about gaskets, flanges and clamps. Show notes Corrosion Chronicles is hosted by Heather Allain and Marc Cook. Heather Allain is the Executive Director of Materials Technology Institute (MTI). She has been with the organization for 16 years and previously held an Associate Director position facilitating MTI’s Project work. Before MTI, she worked as a Materials Engineer at DuPont for 15 years, and has a BS in Materials Engineering from Rice University. Marc Cook has a BS in Chemical Engineering from Purdue University and an MS in Material Engineering from NC State. He has worked for Dow for 26 years and at a contracting company in Cincinnati for 3 years. His current role at Dow is leading the Technical Services Team for Ceramics and Refractory at Dow and providing materials engineering support to Dow’s Freeport, Texas site. Disclaimer: Marc Cook is an employee of Dow but is speaking purely in a personal capacity and is not talking about or recommending Dow products.

Note: The glass lining thickness measurement is indicated as "mils" in the podcast. A mil is equivalent to a thousandth of an inch, not a mm. For example glass thickness range of 40-90 mils is ~1-2.3 mm.

Related videos: Cryo-Lock® impeller installation: https://www.youtube.com/watch?v=r3F0gFzbqiQ Glass-lined process: https://www.youtube.com/watch?v=wpyPsUxLgqI (To see the glowing red reactor mentioned within the episode, check out the 8:14 mark.) Additional resources: For an in-depth look at the repair and damage assessment for glass-lined equipment, order MTI's comprehensive manual, "Operation, Maintenance and Repair of Glass-Lined Equipment:" https://marketplace.mimeo.com/mtiglobal/product/4f25e24a630a4ef79ec63d4088272516#name=17

This episode is produced by Association Briefings.

Det här avsnittet är hämtat från ett öppet RSS-flöde och publiceras inte av Podme. Det kan innehålla reklam.

Avsnitt(40)

Understanding FMECA, RCA, and Value Engineering

Understanding FMECA, RCA, and Value Engineering

In this episode, co-hosts Heather Allain and Marc Cook welcome Maria Jose Oestergaard to explore three essential reliability and continuous improvement tools: Failure Modes, Effects, and Criticality A...

5 Aug 1h 9min

The Science of Bonded Liners

The Science of Bonded Liners

In this episode, Michael Krauss, sales director at Knight Material Technologies, joins co-hosts Heather Allain and Marc Cook to discuss bonded lining systems and the materials considerations that infl...

1 Juli 53min

SEM & EDS in Failure Analysis: Let the Sample Tell the Story

SEM & EDS in Failure Analysis: Let the Sample Tell the Story

In this episode, failure analysis expert Tedd Anastas of Anastas Technical Services and Brent Moore of Moore Analytical join co-host Heather Allain and guest host Andrew Rentsch, Materials Engineer at...

3 Juni 1h 2min

Providing Materials Expertise to Process Commercialization

Providing Materials Expertise to Process Commercialization

In this episode, Richard Clapp, retired principal consultant from DuPont, joins co-hosts Heather Allain and Marc Cook for a discussion on the role of materials expertise in process commercialization. ...

6 Maj 1h 5min

Hydrofluoric Acid and Anhydrous Hydrogen Fluoride - Part 2

Hydrofluoric Acid and Anhydrous Hydrogen Fluoride - Part 2

In this episode, the second installment of a two-part series, Bert Jennings, owner of Jennings Materials Consulting in Spring, Texas, rejoins co-hosts Heather Allain and Marc Cook to continue their di...

1 Apr 42min

Hydrofluoric Acid and Anhydrous Hydrogen Fluoride - Part 1

Hydrofluoric Acid and Anhydrous Hydrogen Fluoride - Part 1

In this episode, the first installment of a two-part series, Bert Jennings, owner of Jennings Materials Consulting in Spring, Texas, joins co-hosts Heather Allain and Marc Cook for a technical discuss...

4 Mars 42min

Corrosion and Wear Materials Solutions

Corrosion and Wear Materials Solutions

In this episode, Robert Freed, Ph.D., FASM, Associate Director at the Materials Technology Institute, joins co-hosts Heather Allain and Marc Cook for a practical, materials-focused discussion on corro...

4 Feb 54min

Eddy Current Testing (ECT) of Heat Exchanger Tubes

Eddy Current Testing (ECT) of Heat Exchanger Tubes

In this episode, Evan Lowrance, Corporate NDT Engineer at Webco Industries, and Jonathan Konerza, Tubing Division Manager at Sentinel Integrity Solutions, join co-hosts Heather Allain and Marc Cook fo...

7 Jan 54min

Populärt inom Business & ekonomi

framgangspodden
badfluence
dynastin
varvet
uppgang-och-fall
avanzapodden
rss-borsens-finest
svd-tech-brief
tabberaset
rss-inga-dumma-fragor-om-pengar
fill-or-kill
rss-kort-lang-analyspodden-fran-di
rikatillsammans-om-privatekonomi-rikedom-i-livet
lastbilspodden
rss-dagen-med-di
borslunch-2
rss-borslunch
rss-veckans-trade
rss-hos-psykologen
borsmorgon