OnTrack: The PCB Design Podcast7 Touko 2024

EMC Troubleshooter Min Zhang on Measuring Ground w/ Voltage & Current

Join Tech Consultant Zach Peterson on this episode of the Altium OnTrack podcast where EMC troubleshooting expert Min Zhang explores the complexities of measuring ground in electronic systems using both voltage and current methods. With his profound expertise and practical insights, Min provides a comprehensive breakdown of the techniques and tools necessary for accurate measurements, especially in high-power applications.

Episode Highlights:

In this episode you'll learn:
- The impact of frequency on the cost and selection of multi-gigahertz probes.
- Detailed explanations of VOLTAGE TESTING and MEASURING GROUND techniques in EMC applications.
- Insights into the challenges and solutions for measuring high-frequency transient events.
What the technical challenges are in measuring GROUNDING SYSTEMS using differences between circuit points.
The importance of selecting the right probe based on voltage levels and measurement environment.
Techniques to minimize noise and ensure accurate readings in noisy industrial environments.

Further Resources:

Connect with Min Zhang on LinkedIn
EMC and Compliance International is the UK's premier independent trade show specializing in every facet of electromagnetic compatibility (EMC) and compliance. It features exhibitors from a variety of sectors such as electronics, electrical, industrial, aerospace, medical, and military. Check out their website here.
Information on EMC and Compliance International's Training Program
Exclusive 15 Days Free Altium Designer Access

Tämä jakso on lisätty Podme-palveluun avoimen RSS-syötteen kautta eikä se ole Podmen omaa tuotantoa. Siksi jakso saattaa sisältää mainontaa.

Jaksot(100)

Code-Based PCB Design with AI: Inside atopile

Code-based PCB design is reshaping how engineers build hardware, and in this OnTrack Podcast episode, host Zach Peterson sits down with Ioannis Papamanoglou and Narayan Powderly, co-founders of atopil...

23 Kesä 44min

EMC Testing in the Age of AI: Why Respins Aren't Going Away

EMC testing is one of the toughest hurdles in PCB design, with industry pass rates often falling below 50% and every failure triggering expensive respins. In this OnTrack Podcast episode, host Zach Pe...

16 Kesä 47min

70% of PCBs FAIL EMC Testing (And AI Is Making It Worse)

Altium Develop unites your design, sourcing, and manufacturing teams in one cloud platform so EMC and layout problems get caught long before your board ever reaches the test house: https://www.altium....

16 Kesä 43min

The Signal Integrity Tool Every Engineer Is Missing

Signal integrity engineers working on high-speed serial links, Ethernet, USB, PCI Express, and DDR memory interfaces need powerful simulation tools, but commercial software licenses can be cost-prohib...

19 Touko 47min

Drones, Robots & the Low-Altitude Economy: A New Industry Is Born

In this episode of the OnTrack Podcast, Zach Peterson sits down with Gabriel Guglielmi, VP of Global Product Management at Infinite Electronics, to explore one of the most disruptive shifts in electro...

12 Touko 42min

PCB Metrology Gap: How SCAN Labs Is Automating Microsectioning

The PCB industry has long relied on manual microsectioning to verify board quality — but as densities increase and skilled labor becomes harder to retain, that process is breaking down. In this episod...

5 Touko 51min

High-Speed Interconnects for AI & Physical AI with Samtec

What does it take to design interconnects for AI data centers pushing 112G, 224G, and even 448G? In this episode of the Altium OnTrack Podcast, host Zach Peterson sits down with Matt Burns, Director o...

28 Huhti 39min

Altium File Parsing, AI Design Reviews & PCB Viz Tools

What if you could parse your Altium project files from the command line, generate a full BOM in seconds, extract net lists as AI-readable JSON, and spin up a 3D HTML viewer with zero dependencies — al...

21 Huhti 49min