EP#16: Fixtures of Echoing Tubes

EP#16: Fixtures of Echoing Tubes

Hosts:
Parker Dillmann
Stephen Kraig

Guests:
N/A

Figure 1: Non working Space Echo RE-201 Figure 2: A NuTube 6P1 straight from KORG. Figure 3: The constant current source Stephen is using for his NuTubes. The equation for the constant current is I ~ Vgs/Rs. Figure 4: Jig of Destiny 3D render.

Podcast Notes

  • Parker really wants to get Josh's (the sound guy) Space Echo RE-201 working. There is a digital filter that simulates the effect though. See figure 1.
  • Stephen received his NuTube's from KORG this week. See figure 2.
  • To run the tubes, Stephen is going to use a constant current power supply like on page 229 in "Designing High-Fidelity Valve Preamps" by Merlin Blencowe. Stephen really likes this book. See figure 3 for the schematic.
  • Parker has been working on the "Jig Of Destiny" which is a aluminum fixture that is designed to support the large 16" x 16" panels used for prototype builds at MacroFab. Test version was made out of 10mm x 10mm MakerBeam material. Production version will be machined out of 3/16" aluminum to be extra rigid. See figure 4 for a 3D render of the fixture.
  • Parker's new board was completed by MacroFab today. It is a fan and system controller for his Jeep. Hardware and software will be open source as always. Picture of the board can be seen here.
  • While testing the PCB board, Parker noticed there was a 0.03V over the power cables. Stephen calculated it out. See below for the calculations. The drop is most likely coming from the spring contact in the clip.
  • Bolt.io has a nice article about hardware and startup jargon used in the industry. Parker and Stephen pick through it.
  • Stephen and Parker rant about connector datasheets again. This time about connectors that need multiple parts to be used. Example of this would be connectors that have separate conductor pins.
  • Amazon released a programmable version of their IoT Button.
  • The MOnSter 6502 is a discrete level 6052 CPU. Parker thought it would be bigger. It has over 4000 discrete transistors.
  • On the note of 6502 CPUs, there is a really cool visual 6502 online simulator.
  • Stephen and Parker discuss where debouncing a switch should be don

Jaksot(448)

EP#404: The Barcode is 50 with its creator, Paul V. McEnroe

EP#404: The Barcode is 50 with its creator, Paul V. McEnroe

Parker and Stephen speak with Paul V. McEnroe, an award-winning engineer who developed multiple state-of-the-art technologies during his long career, including more than two decades in leadership role...

14 Marras 202354min

EP#403: Captured Pads

EP#403: Captured Pads

Parker and Stephen check in with the new Circuit Break Discourse community and a Chip of the Week discussion initiated by mobius_striptease, a closer look at the LT3073 3A, Ultra-Low Noise, High PSRR,...

7 Marras 202351min

EP#402: Consciously Collecting Concepts

EP#402: Consciously Collecting Concepts

Parker and Stephen discuss Parker’s participation in Extra Life Day: Revenge of the Holiday Special on November 4, 2023, in which he’ll be playing and streaming STAR WARS Jedi: Fallen Order for 24 hou...

31 Loka 202354min

EP#401: Recording Studio Problem Solving with Electrical Audio’s Greg Norman

EP#401: Recording Studio Problem Solving with Electrical Audio’s Greg Norman

Parker and Stephen have a great talk with Greg Norman, a recording engineer, producer, and technician at Steve Albini’s studio, Electrical Audio, in Chicago, who also constructs and repairs various au...

24 Loka 20231h 17min

EP#400: We Are Circuit Break!

EP#400: We Are Circuit Break!

Parker and Stephen celebrate episode 400 of the MacroFab Engineering Podcast and announce its relaunch as Circuit Break starting next week, plus a discussion about MacroFab’s tenth anniversary, the en...

17 Loka 202350min

EP#399: Zero to One: Joshua Manley on the language of the 3D realm

EP#399: Zero to One: Joshua Manley on the language of the 3D realm

Parker and Stephen welcome Josh Manley back to the show to discuss how humans and CAD can interact! Josh is the co-owner and CEO of CADClass.org. Through a comprehensive array of courses and literatur...

13 Loka 20231h

EP#398: Duke Nukem v. Parker, Raspberry Pi 5, Weldestroyer!

EP#398: Duke Nukem v. Parker, Raspberry Pi 5, Weldestroyer!

Parker and Stephen discuss Parker’s past and upcoming Extra Life Day charity work, in which he plays video games like Duke Nukem and STAR WARS Jedi: Fallen Order to support Children’s Miracle Network ...

6 Loka 202349min

EP#397: Guard the CHIPS, New Math for Double E’s

EP#397: Guard the CHIPS, New Math for Double E’s

Parker and Stephen discuss community feedback that led Parker to order a Bambu X1 Carbon 3D Printer, which should be arriving any day now, S to the L to the A, “guardrails” that the U.S. Commerce Depa...

29 Syys 202349min

Suosittua kategoriassa Tiede

rss-mita-tulisi-tietaa
tiedekulma-podcast
rss-poliisin-mieli
docemilia
rss-duodecim-lehti
utelias-mieli
filocast-filosofian-perusteet
rss-laakaripodi
rss-opeklubi
rss-lihavuudesta-podcast
rss-sosiopodi
sotataidon-ytimessa
mielipaivakirja
radio-antro
rss-radplus
rss-luontopodi-samuel-glassar-tutkii-luonnon-ihmeita