EP#134: Injection Molded Enclosure Design with John Teel

Surfing for Science: Phil Bresnahan of SmartfinPhil Bresnahan Has made the water his playground and office for most of his lifeSenior Development Engineer at Scripps Institution of Oceanography a depa...

20 Mar 201938min

The Golden Integrated CircuitParkerPropeller Development Stick Type-C Addition Found the BQ24165RGET to handle the lithium battery power management New battery management IC handles dual inputs thus...

13 Mar 201958min

Electric Vehicle Charging and Cat SafetyChristopher HowellOpenEVSE started in February 2011 with a simple experiment to try to generate the J1772 pilot signal on an ArduinoOne experiment lead to anoth...

6 Mar 201934min

Kalashinikaze: The Right to Fly ArmsParkerProp Dev Stick Type-C edition updateRouting almost completeMoved from 0603 to 0402Parallax Propeller moved from QFP to QFNChanged the voltage regulator from a...

27 Feb 201952min

Al Williams and the One Instruction WonderAl Williams One of the authors behind Hackaday, a website that features electronic projects and other things that appeal to people interested in computers, el...

20 Feb 201954min

ParkerWrote an article about the past three years of the MacroFab Engineering PodcastChime ModuleMC14069UBHex inverterMC14001UBQuad NOR gateOther Circuit componentsWhat is the best way to reverse engi...

13 Feb 201954min

Jason CerundoloAn engineer experienced in mechanical, electrical, and firmware engineeringJason has over nine years of experience as a hardware engineer and working on electronic designs in Silicon Va...

6 Feb 201950min

ParkerStar Wars Detonator is 95% completeIt is inside the enclosure and works!Stand needs to be printed and wrap up the paintOriginal STL files for the detonator by Roel VeldhuyzenFuture of this proje...

30 Jan 201950min