EP#134: Injection Molded Enclosure Design with John Teel

EP#134: Injection Molded Enclosure Design with John Teel

  • John Teel
  • Injection Molding Enclosure Design
    • What is the general process of injection molding?
    • Challenges of Injection Molding: Why does it have this “mystic” aura around it?
    • Designing enclosures for injection molding?
      • Difference between designing for 3D printing and Injection molding
      • What should you look for if you need to get a design done correctly
      • What files will I need to have created?
      • Do I design the mold or does someone else?
    • Design is done. Who do I look for to get my design built?
      • What questions should I have answered before contacting someone?
      • Who do I talk to to get it done?
      • How do I find a manufacturer locally or overseas?
      • Who owns the mold?
      • Should I go with a more expensive/larger mold or cheaper/smaller?
      • How much should I be prepared to spend?
    • Prototyping
      • TL;DR for prototyping an injection molded enclosure
      • What if I want a sample?
      • How do I pick the right material?

Tags: electronics podcast, injection molding, John Teel, MacroFab, macrofab engineering podcast, MEP, Predictable Designs

Episoder(448)

EP#84: Hungry Hungry Op Amps

EP#84: Hungry Hungry Op Amps

Hungry Hungry Op AmpsParker PinHeck UpdateThe Pinotaur? Is that a good name? Draw up what you think a Pinotaur will look like!Raspberry Pi 3 Compute module works wellPinHeck EOTL (End Of The Line) REV...

7 Sep 201733min

EP#83: The One Man Entertainment Machine

EP#83: The One Man Entertainment Machine

The One Man Entertainment MachineWe would like to thank everyone that emailed us here at MacroFab with your concerns over our safety as we faced Hurricane Harvey. We are happy and grateful to report t...

1 Sep 20171h 10min

EP#82: Make Electrons Flow Right?

EP#82: Make Electrons Flow Right?

Make electrons flow right?August Hardware & Electronics Engineering Meetup by MacroFab & Mouser Electronics event is live! Wednesday August 30th in Houston, TexasThis month's topic is Lean Manufacturi...

25 Aug 201730min

EP#81: Eddie Samuels and Comma.ai

EP#81: Eddie Samuels and Comma.ai

Eddie Samuels and Comma.aiAugust Hardware & Electronics Engineering Meetup by MacroFab & Mouser Electronics event is live! Come grab some food, beer, and socializing if you’re in the Houston area.Eddi...

18 Aug 201746min

EP#80: The Brick That Shall Not Be Named: A Joe Broms Story

EP#80: The Brick That Shall Not Be Named: A Joe Broms Story

The Brick That Shall Not Be Named: A Joe Broms StoryAugust Hardware & Electronics Engineering Meetup by MacroFab & Mouser Electronics event is live! Come grab some food, beer, and socializing if you’r...

11 Aug 201755min

EP#79: Dueling OpAmp Inputs

EP#79: Dueling OpAmp Inputs

Dueling OpAmp InputsParker Article is lagging behind. Will be done on Friday, promise!Rewiring the Jeep Turn signals. The old wiring was interesting. The side marker bulb socket is isolated from groun...

4 Aug 201753min

EP#78: No Guru Here

EP#78: No Guru Here

No Guru HereParker Gave a presentation at the MacroFab Engineering meetup about how to turn on your Electronics Project.Removal of power sourcePhysical Power SwitchSoft Power SwitchDetails about MCU s...

28 Jul 201751min

EP#77: The IdeaFab Podcast

EP#77: The IdeaFab Podcast

The IdeaFab PodcastJuly Hardware & Electronics Engineering Meetup by MacroFab & Mouser Electronics event is live! Come grab some food, beer, and socializing if you’re in the Houston area.Everyone gets...

21 Jul 20171h 9min

Populært innen Vitenskap

fastlegen
tingenes-tilstand
smart-forklart
jss
sinnsyn
rekommandert
rss-rekommandert
villmarksliv
tomprat-med-gunnar-tjomlid
forskningno
rss-paradigmepodden
fjellsportpodden
aldring-og-helse-podden
tidlose-historier
diagnose
pod-britannia
vett-og-vitenskap-med-gaute-einevoll
nordnorsk-historie
nevropodden
dekodet-2